Why Measure Gait in Rehab, and How Do You Follow Progress?

Patients feel better before they move better, and sometimes they feel better while they move worse. That gap is why gait deserves a measurement in rehab, and not only a question. This article makes the case, then gives the method: the same walk, the same way, at each stage.

Physical therapist kneeling to watch a patient walk across a bright studio
AI-generated editorial illustration.

Why measure gait in rehab?

1. Feeling and function do not move together. One hundred patients were tested before total knee replacement, then 1 and 12 months after it. At one month, every measure of physical performance had fallen. Perceived function did not follow the same trend, and some patient-reported scores had risen. The authors concluded that patient perception fails to capture the early decline, and may overstate the long-term improvement. Mizner et al., Journal of Arthroplasty, 2011.

2. The walk does not return to normal by itself. A systematic review of gait after total knee replacement found that operated knees still bent less during weight acceptance than the knees of healthy controls. Milner, Journal of Orthopaedic Science, 2009.

3. A small change is a real result. A change in walking speed of a tenth of a meter per second can be clinically important, as the section on change below explains. You can only show a change that size if you measured the start.

4. The patient can see it. A side-by-side comparison gives patients evidence of their own progress, in a form they can discuss with you.

So the question is not whether to ask the patient how they feel. It is what you set beside the answer.

How do you set a baseline?

Without a baseline, every later session is a snapshot. With one, it is a comparison.

Take the baseline when the plan starts, not when progress stalls. Record the conditions with it, because they are what make the next session comparable:

  • the task: the walking instruction, the distance or the duration;
  • the footwear, and any orthotic or brace;
  • the walking aid, if there is one;
  • the pain reported that day, and anything unusual about the session.

A baseline taken on crutches is a valid baseline. It is a baseline for walking on crutches.

Which measures should you follow?

Follow a few, chosen for the patient's goal. A long list of parameters is harder to read than three that matter.

MeasureWhat it describes
Gait speedHow fast the patient walks at a comfortable speed.
Left/right symmetryWhether the two sides move alike.
Cadence and stride lengthHow the patient produces that speed: more steps, or longer ones.
Stance and swing timeHow long each foot spends on the ground and in the air.

After a knee replacement, the question may be whether the operated side shares the work again. After an ankle injury, it may be push-off. Pick the measures that describe the goal you agreed with the patient.

How do you set milestones?

A milestone is a planned re-assessment, not a target number. Tie it to the plan: the end of a phase, a change of walking aid, a return to a task the patient cares about.

At each milestone, repeat the baseline conditions. If something had to change, such as the patient no longer using a cane, write it down. The change is part of the finding.

How much change is real change?

Every measurement varies from one trial to the next. A difference smaller than that variation tells you nothing.

Published work gives you a sense of scale for some measures. A systematic review of comfortable gait speed in adults with pathology, covering studies in stroke, hip fracture and multiple sclerosis among others, concluded that changes of about 0.10 to 0.20 m/s may be clinically important. Bohannon and Glenney, Journal of Evaluation in Clinical Practice, 2014.

Use that range as a guide. It comes from studies of gait speed in specific populations. For other measures, compare the patient with their own earlier sessions, taken under the same conditions.

What if the numbers and the symptoms disagree?

They often do, and both directions are informative.

  • The patient feels better, and the walk looks the same. Symptoms and movement do not always change together. Keep the plan honest about what has and has not shifted.
  • The walk has changed, and the patient feels no different. Show them. A visible change can be the first evidence of progress they see.
  • Both are flat. That is a finding too. It is a reason to review the plan, not to repeat the test.

Neither record overrules the other. A measure describes movement. The patient describes their life. You need both to decide.

How do you show progress to the patient?

  • Two sessions, side by side. One comparison beats a page of values.
  • Their own baseline as the reference. Not a population norm they may never match.
  • One or two measures. The ones tied to their goal.
  • Plain words. "Your left and right sides are closer than they were in March."

Patients who can see what changed have something concrete to discuss. For more on that conversation, see why patients drop out of rehab.

Where does Baliston Health fit?

A baseline, a milestone and a comparison, in the consultation. Sensor insoles equipped with AI Mov-Scan capture the walk in suitable shoes. AI Mov-Scan captures. The platform analyzes and generates the Full Clinical Report. Balia, the platform's AI assistant, explains. The practitioner decides.

Open an analysis in the patient's profile, choose Compare, and select the earlier session. You see the two sets of findings side by side, and you can ask Balia to summarize the differences shown. It helps you show objective progress to the patient. The interpretation and the plan stay yours.

Explore Baliston Health for MSK care and rehabilitation, read about walking after knee replacement, or book a demo.

FAQ

How often should I re-assess gait during rehab?
At the milestones in your plan: the end of a phase, a change of walking aid, or a return to a key task. Tie each re-assessment to a decision you need to make.
Is a more symmetrical walk always the goal?
No. Symmetry is one measure. Set it beside the patient's goals, symptoms and the rest of your assessment.
Can I compare sessions taken in different shoes?
You can, if you record the difference and take it into account. The cleanest comparison keeps footwear and task the same.
The movement behind this article
See what your movement is saying.

In three minutes, your practitioner has the Full Clinical Report. Each assessment provides 30+ biomechanical parameters tailored to the selected analysis to support their interpretation. Ask your practitioner about a Baliston movement assessment.

How Baliston works → For practitioners — book a demo →