Skip to content

Dynamic custom orthotics

Orthotics informed by how they walk.

The foot shape tells you the foot. The walk tells you how it moves.

Orthotic prescription informed by real gait. The practitioner prescribes.

A 3D-printed custom orthotic with a lattice under the arch and heel

Dynamic Custom Orthotics

Three steps, one prescription: the foot shape, the walk, then the custom design. The practitioner prescribes.

  1. Foot Shape Scan

    Capture the patient's foot shape with a phone.

    Phone screen with a 3D plantar scan of both feet: foot length, arch height and the 3D surface meshA practitioner scans the sole of a patient's foot with a phone
  2. Dynamic Gait Analysis

    Measure how the patient walks with AI Mov-Scan.

    Phone screen with the gait analysis: left and right gait lines, propulsion, flatfoot and loading
  3. 3D-Printed Orthotics

    Combine foot-shape and gait insight to inform the custom design.

    Phone screen with the orthotics recommendation and the 3D custom insole design

Screens: illustrative, simulated data.

Why gait

A static scan shows the shape. A walk shows the movement.

Today, most orthotics start from a foot scanner, a pressure mat or a cast, all taken while the patient stands or lies still. They show the shape of the foot, not how it moves.

  • A patient stands barefoot on a foot scanner while a clinician watches
    Foot scanner
  • A patient stands still on a pressure mat while a podiatrist reads the pressure map on a screen
    Pressure mat
  • A patient presses her foot into a foam impression box while a podiatrist guides her knee and ankle
    Foot casting

We add the movement. The dynamic gait assessment with AI Mov-Scan shows what happens when they walk: left/right symmetry, foot progression angle, foot roll and push-off.

3D-printed orthotics

Designed from the walk. Printed for the patient.

The custom design is 3D printed through our orthotics partners. You fit it in the clinic, then re-assess the walk to see how the patient moves with it.

What you get

From the walk to the orthotic.

A practitioner fitting an orthotic insole into a patient's shoe
  • 01

    Dynamic gait assessment

    Walk, run and jump analyses with AI Mov-Scan, the Full Clinical Report and Balia.

  • 02

    Orthotic recommendations

    Prefabricated and custom options suggested from the scan and the gait data, through orthotics partners in each market.

  • 03

    3D-printed orthotics

    Custom devices designed from the foot shape and the walk, then 3D printed.

  • 04

    Follow-up after fitting

    Repeat the gait assessment after fitting to compare how the patient walks before and after.

The practitioner remains responsible for every prescription. Orthotics are delivered through our orthotics partners in each market.

Your next step

See the gait assessment in 30 minutes.

Book a video call. We show you the technology, a sample report and the orthotics workflow for your practice.

Screens: illustrative, simulated data.